Updated Aruba S2500.md (markdown)

networking/Aruba S2500.md

@@ -13,7 +13,9 @@ To factory reset the switch, do the following:
 4. Press the ``menu`` button until ``Factory Default`` is selected.
 5. Press the ``enter`` button once to select, and a second time to confirm.
 
-### Connecting Via Serial
+## Connecting to the Switch
+
+### Console
 The Aruba S2500 has a micro USB port on the back which exposes a serial
 interface that can be used to manage the switch.
 
@@ -35,7 +37,7 @@ You should now be dropped to a shell that looks like the below
 ```
 
 
-### Connecting Via Ethernet (TODO)
+### Ethernet (broken)
 
 The Aruba S2500 provides a Web UI that can be used to configure the switch.
 
@@ -44,18 +46,32 @@ most modern browsers. You can enabled outdated ciphers in your browser which
 will enable you to sucessfully connect, but the WebUI may still fail to display.
 
 To connect to the WebUI
-
-1. Connect an ethernet cable between your device and one of the 1GbE port on
+1. TODO: enable the Quick Setup WebUI via the front panel menu
+2. Connect an ethernet cable between your device and one of the 1GbE port on
    the front of the switch
-2. On your machine, assign the interface a static IP with the follow configuration
+3. On your machine, assign the interface a static IP with the follow configuration
    - IP: `172.16.0.2`
    - Subnet Mask: `255.255.255.0` or `/24`
    - Gateway: `172.16.0.1`
-3. Connect to `http://172.16.0.254` in your browser.
+4. Connect to `http://172.16.0.254` in your browser.
 
 You should now have access to the WebUI. 
 
+## Running through Quick Setup
 
+### Console
+After logging into the switch's console, you need to launch the switch's
+`Quick-setup` program. 
 
+This can be done by running the `enable` command and providing the password
+`enable` as seen below. You will then need to press `y` berfore the `Quick-setup`
+prompt times out.
+```
+ArubaS2500-48P-US) >enable
+Password:enable
+Quick-setup helps in setting the basic configuration of the system
 
-hello
+Autoconfiguration of system will be stopped, if Quick-setup is launched by user
+
+Invoke Quick-setup (y|n)??? [y]:y
+```